ER-Collet with seal for IC ER16 | 426 EH | < 15µm | Ø 10Application: Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped (applicable up to 120 bar). In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

High holding forces: increase by a factor of 3 to 5 compared to standard jaws

5 x 58 x 18

Adapters ISO / PSK with axial clamping

For setting tools (e

Instructions for use

Angular accuracy = 10 arcmin

Rolled thread

- Calibration certificate

- Wooden box

- Maximum concentricity <0

HSS-Co5 Twist drill DIN338 d=6

In this way the clamping ranges can be extended to smaller sizes