Internal Truck Assembly - Aluminum Slide GateSwivel type, zinc die coated steel, with 6 sealed lubricant ball bearing rollers, 2 inches (50 mm) in diameter by 9 16 (14 mm) in width, and 2 side rolling wheels to ensure truck alignment in track. Mount trucks on post brackets using 7 8 (22 mm) diameter ball bolts with 5 8 (16 mm) or shank Truck should slide freely down track while not under a load. Once installed, gate should open freely without drag or resistance. Truck assembly shall withstand

recommended (2) for use with single arm gate to secure gate in open and close position

Chain: #50 nickel-plated (25ft

even after using manual disconnect

Carriage nut and bolt not included

Your selection of perforated metal sheet will be enhanced by our robust framework

Green Summary

and you would use this in tandem with two support brackets inside the vinyl to hold it firm to the vinyl post (4": 7WI-DSB-4X4

Battery bracket not included

This is a Black Commercial Pipe 4" x

Aluminum mounting channel for L50 Small and S50 Large Edge Profiles

or creating a temporary barrier for public safety

1/4" steel top plate