Nixer RS32 - Rack Mount 64x64 AoIP Network Switch (Ravenna Version)The Nixer RS32 is a 1U 19inch rack mounted AoIP switching unit. 2 models are available Dante or Ravenna. RS32 allows for the simple set up and control of 32 AoIP switches. These can either be 2 into 1 input switches or 1 into 2 output switches which can be configured on a switch by with basis. All of the features are easily and simply controlled via the large intuitive touchscreen interface. Once configured, switches can easily be operated by touching

(20) PPA R38N Receivers

The integrated rigging hardware is used to securely lock the array together while the dual-angle pole socket provides aiming flexibility

There’s also a low-frequency 80Hz Linkwitz-Riley cutoff that can be engaged if you’re using Core 59 with a subwoofer to extend the low frequency response

Avoid ground loops as there is no LF-shield connection to ground

88"/149mm Round Cast-Iron Base

Drawing on its vast experience in the art and science of loudspeaker technology

The ARC-K1e features a push-button rotary encoder providing simple control of one or two parameters (typically volume) in the Symetrix DSP hardware

and volume control

the maximum number of simultaneous input and output can be increased to 32 channels – even at 96kHz/24-bit resolution

the ring is return)

Then you can change the source tape back to the whole bin by pressing the escape key

and input configuration settings