Aero Rear Wing TreeHyper Racing # 30 074 Not only is this wing tree aerodynamic, it is very strong. Much stronger than our 30 075 wing tree. The wide but narrow cross section of the aero tubing in combination with the X that forms the cross brace, makes for a very ridged upright. Normally the wing motor, while pushing on just one side of the wing upright, will bind the wing due to the flex in the 30 075 upright. This aero upright does not do that. HYPER RACINGS GOLD

TORX® = registered trademark of Acument Intellectual Properties

Hyper Racing # 06-1421TI

971-04-28-1

Hyper Racing # 34-6006

you will need to replace the 7/16-20 x 2" HHCS with a 7/16-20 x 2-¼" bolt

The locator ring

Hyper Racing # 04-161

Hyper Racing recommends bladders for all forms of racing

Hyper Racing # 18-0005

CNC machined 1-3/4" diameter x 51" long splined rear axle is made from 7075 T-6 Aluminum with 27 splines

Turnbuckle wishbones require 95-1072 Titanium Turnbuckle

Hyper Racing # 02-310