TNY268 Power Integrations Off-line Switcher ICThe TNY268 integrates a 700 V power MOSFET, oscillator, high voltage switched current source, current limit, and thermal shutdown circuitry onto a monolithic device IC. The start up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias winding and associated circuitry. In addition, the TNY268 device incorporates auto restart, line under voltage sense, and frequency jittering. An innovative design

Higher switching frequency capability than competitive IGBTs

Brown for these 68E resistors

Male 7 pin (pcb mount)

Refresh Rate: 1

These are Metal Film Resistor with a value of 3k ohm 1/4W and tolerance of ±1%

The GPIO header remains the same

That is the current should always flow from the anode to the cathode

At the Vcc pin

the default is 1

Plate Diameter 35mm  Element Diameter 23mm  Thickness 0

Maximum Junction Temperature 175 °C

of Pins 02 MCD 300-400 mcd Quantity 1000Pcs