SYNERGY 10B-3-NO107 20PK - RENOLD 5/8 Inch Pitch Synergy LinkFor use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See Riveting Chain Endless' for full instructions).

23 07 e tn9 Extra Wide Bore Size - 35mm Extra Capacity Glass Fibre Reinforced PA66 Cage

2 kN supports extended operating life under moderate load conditions

This 1040KG bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility and a tapered bore

This 6005 2ZNR SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a snap ring groove in the outer ring and an appropriate snap ring

5/8 bearing is a Cast Iron Take Up Bearing Unit

This 7922A5TRSULP3 bearing is a Super Precision angular contact bearing with a 25° contact angle and a phenolic cage

22 11 e tn9 w64 Wide Bore Size - 55mm Extra Capacity Glass Fibre Reinforced PA66 Cage

One Flange on Outer Ring Medium 20mm - Bore Size Standard Design Steel Cage Normal Internal Clearance

LWLC20 C4 R480 T1 H S2 Non-Maintenance Free Short Stainless Steel Miniature Linear Way unit Four Carriages 480mm - Rail length Light Preload High Accuracy Class S2 Specification

This MRJ25 is a medium

1/4 Inch Shaft Diameter Parrallel Outside Diameter Insert with Grease Groove and Snap Ring Fitted

This 7304BEP bearing is a single row angular contact bearings with a 40° contact angle